InfRec Thermo Gear G100, Operation Manual

Page: 38 / 141

Chapter2 Basic
<Focus setting>
The focus setting screen is displayed by pressing NEAR(Left) or FAR(Right) side of the joy stick button.
On the focus setting screen, pressing NEAR(Left) sets the focus point toward close range, and pressing
FAR(Right) sets the focus point toward the distance ( ∞ ). Pressing CENTER determines the focus point and
exits the focus setting screen.
Focus indicator
[Focus setting screen]
Notes
- This function is available in the run state.
◎
VISIBLE IMAGE DISPLAY
<Display mode change>
Briefly pressing the VIS button changes the mode in the following order: thermal image
→
visual image
→
composite image → thermal image (repeated).
[Visible image] [Composite image]
<Composite display set menu>
The composite display set menu (see right figure) is displayed by
holding down the VIS button in the composite display mode.
From this menu, you can set the display style, temperature range and
transparency for composite image, and the size and position of visual
image used for composition.
[Composite display set menu]
See page 4-16 for operations of the composite display set menu.
Selecting “BACK” on the set menu and pressing CENTER will return to the composite display mode.
2-3
95691-2935-0000