INFICON
Service Instructions | 5
Sensistor Sentrac-Leak Detector-ServiceManual-nip65en1-05-(1901)
57 / 76
5.19 Changing Probe O-rings
5.19.1 Changing Nut O-ring
Part
Part no.
Qty
Consumables
O-ring 8x1 NBR70
591-284
1
Disassemble
1
Disconnect the Probe from the Sensistor Sentrac.
2
Use a Sensor Key to remove the Probe Sensor Nut (A) from the Probe Neck
(B).
3
Use a small slotted screw driver to remove the O-ring inside the Probe Sensor
Nut (A).
4
Clean the Probe Sensor Nut (A) thoroughly.
Assemble
1
Use the O-ring mounting tool for nut probe tip to mount the O-ring into the Probe
Sensor Nut (A).
2
Lubricate the O-ring with lock oil.
3
Use a Sensor Key to mount the Probe Sensor Nut (A).
4
Connect the Probe to the Sensistor Sentrac.
5
Start the Probe and make sure that it works properly, check:
ð
Sensitivity
ð
Display
ð
LED-lamp
6
If the test fails, see Troubleshooting [
Summary of Contents for Sensistor Sentrac
