manualshive.com logo in svg

Inficon HAPSITE ER, Operating Manual, Page: 51 / 436

Share
Download
Inficon HAPSITE ER Operating Manual Download Page 51

INFICON

Operate the Instrument in Portable Mode | 9

074-471-P1E HAPSITE ER Operating Manual

51 / 436

9 Operate the Instrument in Portable Mode

9.1 Start HAPSITE ER in Portable Mode

Portable mode refers to using HAPSITE ER without the laptop computer.

Required Materials:

• HAPSITE ER (analytical module)

• internal standard gas canister

• carrier gas canister

• charged battery

• AC to DC power converter power supply

• probe

Procedure:

1

Assemble HAPSITE ER as shown in Basic Assembly [

}

 30].

2

Press the 

POWER

 button on the front panel. The word 

POWER

 illuminates.

Powering on HAPSITE ER takes one to two minutes.

Summary of Contents for HAPSITE ER





















































































































































































































































































































































































































































Reviews:

No comments