Inficon HAPSITE ER Operating Manual Download Page 138

Page: 138 / 436

10 | Communications and Touch Screen Options

INFICON

138 / 436

074-471-P1E HAPSITE ER Operating Manual

10.4.3.3 European Safety Compliance Statement

This device has been tested and certified according to the safety standard EN

61010-1: 2010 and is intended to be used in accordance with the information provided

in this manual. For additional information concerning the directives and standards that

this instrument complies with, please refer to the Declaration of Conformity [

}

12] that

is located in the front of this manual.

Summary of Contents for HAPSITE ER





















































































































































































































































































































































































































































Search results

Summary of Contents for HAPSITE ER

Reviews:

Inficon HAPSITE ER, Operating Manual, Page: 138 / 436

Search results

Summary of Contents for HAPSITE ER

Reviews: