Inficon HAPSITE ER Operating Manual Download Page 77

Page: 77 / 436

INFICON

Operate the Instrument in Portable Mode | 9

074-471-P1E HAPSITE ER Operating Manual

77 / 436

9.2.2 Show All

HAPSITE ER will only show methods that are compatible with the current sample and/

or accessory configuration. By checking the

Show All

box, all loaded HAPSITE ER

methods will appear in the text box, regardless of configuration. Non-compatible

methods will be shown in a lighter gray. The non-compatible methods are for

reference only and cannot be selected to run.

9.3 Survey Mode

The

Survey Mode

is used for quick analysis and tentative results. When sampling

unknown compounds, it is recommended that a

Survey

run be completed before

running

Analyze

Overview

• Using the probe, sample the air away from the area of concern for one minute.

This establishes the background of VOCs currently present in the area.

CAUTION

Do not touch the sample with the probe. Do not allow liquids to enter the

probe.

Summary of Contents for HAPSITE ER





















































































































































































































































































































































































































































Search results

Summary of Contents for HAPSITE ER

Reviews:

Inficon HAPSITE ER, Operating Manual, Page: 77 / 436

Search results

Summary of Contents for HAPSITE ER

Reviews: