manualshive.com logo in svg

Inficon HAPSITE ER, Operating Manual, Page: 134 / 436

Share
Download
Inficon HAPSITE ER Operating Manual Download Page 134

10 | Communications and Touch Screen Options

INFICON

134 / 436

074-471-P1E HAPSITE ER Operating Manual

10.4.2 Regulatory Compliance Information for CANADIAN Users

This section of the Operating Manual lists Industry Canada (IC) compliance

information for the HAPSITE ER system that contains the wireless communication

option.

This equipment contains an OEM Embedded Wireless Bridge (Ethernet to Wireless

LAN) Module from Quatech Inc.

IC: 3913A-WLNG1

This device complies with RSS-210 of Industry Canada (IC) and is subject to the

following two conditions:

1

This device may not cause harmful interference, and

2

This device must accept any interference received, including interference that

may cause undesired operation.

10.4.2.1 Industry Canada (IC) Notes

This equipment complies with Canadian RSS-210.

 CAUTION

This device has been designed to operate with an antenna having a

maximum gain of 5.0 dB. An antenna having a higher gain is strictly

prohibited per regulations of Industry Canada (IC). The required antenna

impedance is 50 ohms.

To reduce the potential radio interference to other users, the antenna type and gain

should be so chosen that the equivalent isotropically radiated power (EIRP) is not

more than required for successful communications.

10.4.3 Regulatory Compliance Information for EUROPEAN

Users

This section of the Operating Manual lists R&TTE compliance information for the

HAPSITE ER system that contains the wireless communication option.

HAPSITE ER is marked with the following symbol:

Summary of Contents for HAPSITE ER





















































































































































































































































































































































































































































Reviews:

No comments