Inficon HAPSITE ER Operating Manual Download Page 151

Page: 151 / 436

INFICON

Laptop Operation | 11

074-471-P1E HAPSITE ER Operating Manual

151 / 436

The software will check the pressure in the gas canisters, heat up all necessary

components, and run an AutoTune (if required). A concentrator cleanout will

also be run if needed.

When it is finished heating, a prompt will appear to indicate HAPSITE ER is

ready to run a sample. Click

RUN

. For detailed instructions, refer to ANALYZE

(GC/MS) Mode with the Concentrator [

}

86].

CAUTION

Do not place the sample probe in liquids while sampling.

Summary of Contents for HAPSITE ER





















































































































































































































































































































































































































































Search results

Summary of Contents for HAPSITE ER

Reviews:

Inficon HAPSITE ER, Operating Manual, Page: 151 / 436

Search results

Summary of Contents for HAPSITE ER

Reviews: