manualshive.com logo in svg

Inficon HAPSITE ER, Operating Manual, Page: 296 / 436

Share
Download
Inficon HAPSITE ER Operating Manual Download Page 296

14 | Tune

INFICON

296 / 436

074-471-P1E HAPSITE ER Operating Manual

Shifts the mass peak left

Increases the peak resolution.

Decreases the peak resolution.

Shifts the mass peak right.

Decreases the

 Ion Energy

.

Increases the 

Ion Energy

.

Zooms to a single peak scan display

window.

14.4.12 Setting the Full Scan Range

Placing the mouse cursor on the x axis of the full scan window and right-clicking

displays the

 Set Full Scan Range

 window. This allows a custom scan range to be

entered. The scan ranges of 45 to 300 amu or 1 - 45 amu can also be selected.

The EM voltage will automatically be decreased by 500 volts (default) whenever a

range below mass 45 is scanned.

Summary of Contents for HAPSITE ER





















































































































































































































































































































































































































































Reviews:

No comments