manualshive.com logo in svg

Inficon HAPSITE ER, Operating Manual, Page: 192 / 436

Share
Download
Inficon HAPSITE ER Operating Manual Download Page 192

12 | ER IQ Software

INFICON

192 / 436

074-471-P1E HAPSITE ER Operating Manual

The 

Data Settings

 window displays the

 Event Data

 and the 

Directories

. The 

Event

Data

 allows the user to set the type of 

Notifications

 that will be displayed on the

HAPSITE ER front panel and laptop. An error occurs when a warning has been

displayed, but the warning has been ignored. If 

Error

 is checked, an error message is

displayed. If 

Warning

 is checked, a warning message is displayed, when a problem,

such as high pressure, arises. If 

Beep

 is checked, HAPSITE ER beeps when an error

or a warning occurs.

Summary of Contents for HAPSITE ER





















































































































































































































































































































































































































































Reviews:

No comments