Inficon HAPSITE ER, Operating Manual, Page: 45 / 436

INFICON HAPSITE Components and Assemblies | 8
074-471-P1E HAPSITE ER Operating Manual 45 / 436
8.3 Battery
The battery provides power to HAPSITE ER when portability is desired. Under
optimum conditions, the battery has a two hour life. The battery can be charged using
the battery charger. Alternately, it can be charged in the HAPSITE ER when it is
connected to external power. However, the battery will charge more slowly when
charging inside HAPSITE ER.
8.3.1 Battery Charger
The auxiliary battery charger (part number 930-470-G1) uses AC power to charge up
to three HAPSITE ER batteries in 15 hours or less.
CAUTION
The battery charger is not sealed against moisture, debris, or
contamination.
The battery charger operates from a range of normal AC voltages from 100 to 230
V(ac). It will continue to operate without internal damage at a voltage as low as 90
V(ac) and as high as 253 V(ac). The frequency can be from 50 to 60 Hz. The battery
charger draws 120 W when fully loaded.
The battery charger is designed for indoor use at ambient temperatures from 5°C to
35°C (41°F to 95°F). The battery charger is not designed for exposure to
contaminants, as it cannot be decontaminated.
8.3.2 Battery Charger Connections and Startup
1 Plug the power cord into the connector at the right rear of the battery charger.
2 Plug the battery charger into a grounded outlet.
ð
The ON indicator on the battery charger illuminates. The battery charger does
not have a power switch.