manualshive.com logo in svg

Inficon HAPSITE ER, Operating Manual, Page: 18 / 436

Share
Download
Inficon HAPSITE ER Operating Manual Download Page 18

5 | Operating Manual Style Conventions

INFICON

18 / 436

074-471-P1E HAPSITE ER Operating Manual

5 Operating Manual Style Conventions

The following information describes the conventions used throughout this manual.

When holding down a key and then pressing another key, this is expressed as (for

example) “Press Ctrl+C.”

It is assumed that the CD drive used is drive 

d

. If using another drive, substitute the

drive letter being used for

“d:”.

It is assumed that the hard drive used is drive 

c

. If using another drive, substitute the

hard drive letter being used for

“c:”.

Left-click means to press and release the left mouse button (LMB) and right-click

means to press and release the right mouse button (RMB).

The HAPSITE software operates in the Windows environment using the Windows®

Graphical User Interface (GUI). Actions in the HAPSITE software GUI that are

common to the Windows GUI are not explained in detail in this manual. Refer to the

Windows documentation supplied by Microsoft®.

Summary of Contents for HAPSITE ER





















































































































































































































































































































































































































































Reviews:

No comments