manualshive.com logo in svg

Inficon HAPSITE ER, Operating Manual, Page: 30 / 436

Share
Download
Inficon HAPSITE ER Operating Manual Download Page 30

8 | HAPSITE Components and Assemblies

INFICON

30 / 436

074-471-P1E HAPSITE ER Operating Manual

AC to DC power converter

Batteries

A laptop computer and its accessories will be shipped. The ship kits for the laptops will

vary; the items in the laptop ship kit are based upon the type of laptop ordered. The

laptop kits will include the ER IQ Software CD and NIST Library Install CD.

8.2 Basic Assembly

 CAUTION

HAPSITE ER must be operated a minimum of every 3 weeks.

Recommended storage is in Extended Standby.

8.2.1 Attaching the Probe

The probe attaches on the top of HAPSITE ER. The probe has two connections: a

LEMO® communication line and a Valco connector.

Summary of Contents for HAPSITE ER





















































































































































































































































































































































































































































Reviews:

No comments