IMO HD2 IP Series, Instruction Manual

Page: 166 / 361

HD2 IP55 High-ingress Protection Series Inverter
-152
Function
code
Name Description
Default
value Modify
Setting range of P06.17 : -300.0%– P06.19
Setting range of P06.18 : 0.00V–10.00V
Setting range of P06.19 : P06.17 –300.0%
Setting range of P06.20 : 0.00V–10.00V
Setting range of P06.21 : 0.000s–10.000s
P06.22–
P06.26
Reserved / / /
P06.27 Lower limit of
HDO output -300.0%–
P06.29 0.00%
○
P06.28
Corresponding
HDO output of
lower limit
0.00–50.00kHz 0.00kHz
○
P06.29 Upper limit of
HDO output
P06.27 –300.0% 100.0%
○
P06.30
Corresponding
HDO output of
upper limit
0.00–50.00kHz
50.00
kHz
○
P06.31
HDO output
filter time
0.000s–10.000s 0.000s
○
P06.32 Reserved / /
/
P06.33
Frequency
reach detection
value
0–P00.03 1.00Hz
○
P06.34
Frequency
reach detection
time
0–3600.0s 0.5s
○
P07 group––HMI
Function
code
Name Description
Default
value Modify
P07.00 User password
0–65535
Set it to any non-zero value to enable
password protection.
00000: Clear previous user password and
disable password protection.
After user password becomes valid, if wrong
password is inputted, users will be denied
entry. It is necessary to keep the user
password in mind.
Password protection will be effective one
minute after exiting function code edit state,
and it will display "0.0.0.0.0" if users press
PRG/ESC key to enter function code edit state
again, users need to input the correct
password.
0
○
Function parameter list