IMO HD2 IP Series, Instruction Manual

Page: 303 / 361

HD2 IP55 High-ingress Protection Series
Communication protocol
-283-
Function Address Data description R/W
Communication-based
value setting
2001H Communication-based frequency setting (0–
Fmax, unit: 0.01 Hz)
R/W
2002H PID
setting, range (0–1000, 1000
corresponding to 100.0%)
In the actual operation, set P00.01 to 2 and P00.06 to 8.
The command transmitted by the master is as follows:
01 10 20 00 00 0204 00 01 03 E8 3B 10
inverter Continuous Parameter Parameter
Number of Froward
10 Hz CRC
address write address quantity bytes running
command
If the operation is successful, the following response is returned:
01 10 20 00 00 02 4A 08
inverter
address
Continuous
write
command
Parameter
address
Parameter
quantity
CRC
Example 2: Set "Acceleration time" of the inverter whose address is 01H to 10s, and
"Deceleration time" to 20s.
Function
code
Name Description Default value Modify
P00.11
Acceleration
time 1 Setting range of P00.11 and P00.12: 0.0–
3600.0s
Depend on
model
○
P00.12
Deceleration
time 1
Depend on
model
○
The address of P00.11 is 000B, 10s is 0064H in the hexadecimal form, and 20s is 00C8H in
the hexadecimal form.
The command transmitted by the master is as follows:
01 10 00 0B 00 0204
00 64 00 C8 F2 55
invert
er
address
Continuous
write
command
Parameter
address
Parameter
quantity
Number of
bytes
10s 20s CRC
If the operation is successful, the following response is returned:
01 10 00 0B 00 02 30 0A
inverter
address
Continuous
write
command
Parameter
address
Parameter
quantity
CRC