IMO HD2 IP Series, Instruction Manual

Page: 130 / 361

HD2 IP55 High-ingress Protection Series Inverter
-116
6: Set via multi-step speed running
7: Set via PID control
8: Set via Modbus communication
9: Set via PROFIBUS/CANopen/DeviceNet
communication
10: Set via Ethernet communication
11: Set via high speed pulse HDIB
12: Set via pulse string AB
13: Set via EtherCAT/PROFINET
communication
14: Set via PLC card
15: Reserved
P00.08
Reference
object of B
frequency
command
0: Max. output frequency
1: A frequency command
0
○
P00.09
Combination
mode of
setting source
0: A
1: B
2: (A+B)
3: (A-B)
4: Max. (A, B)
5: Min. (A, B)
0
○
P00.10 Set frequency
via keypad
When A and B frequency commands are set by
keypad, the value is the initial digital set value of
the inverter frequency.
Setting range: 0.00 Hz– P00.03 (max. output
frequency)
50.00Hz
○
P00.11 Acceleration
time 1
Acceleration time is the time needed for
accelerating from 0Hz to set output frequency
( P00.03 ).
Depend
on model
○
P00.12 Deceleration
time 1
Deceleration time is the time needed from
decelerating from set output frequency ( P00.03 )
to 0Hz.
The HD2 IP55 high-ingress protection
series inverter defines four groups of acceleration
and deceleration time, which can be selected via
multi-function digital input terminals (P05 group).
The acceleration/deceleration time of the inverter
is the first group by default.
Setting range of P00.11 and P00.12 : 0.0–
3600.0s
Depend
on model
○
Function parameter list