IMO HD2 IP Series, Instruction Manual

Page: 125 / 361

HD2 IP55 High-ingress Protection Series
Basic Operation Instructions
-111-
Function
code
Name Description
Default
value
15: Rectifier module overheat (OH1)
16: Inverter module overheat (OH2)
17: External fault (EF)
18: 485 communication fault (CE)
19: Current detection fault (ItE)
20: Motor autotuning fault (tE)
21: EEPROM operation fault (EEP)
22: PID feedback offline fault (PIDE)
23: Brake unit fault (bCE)
24: Running time reached (END)
25: Electronic overload (OL3)
26: Keypad communication error (PCE)
27: Parameter upload error (UPE)
28: Parameter download error (DNE)
29: Profibus DP communication fault (E-
DP)
30: Ethernet communication fault
(E-NET)
31: CANopen communication fault (E-
CAN)
32: To-ground short-circuit fault 1 (ETH1)
33: To-ground short-circuit fault 2 (ETH2)
34: Speed deviation fault (dEu)
35: Mal-adjustment fault (STo)
36: Underload fault (LL)
37: Encoder offline fault (ENC1O)
38: Encoder reversal fault (ENC1D)
39: Encoder Z pulse offline fault (ENC1Z)
40: Safe torque off (STO)
41: Channel H1 safety circuit exception
(STL1)
42: Channel H2 safety circuit exception
(STL2)
43: Channel H1 and H2 exception
(STL3)
44: Safety code FLASH CRC check fault
(CrCE)
55: Repetitive extension card type fault
(E-Err)
56: Encoder UVW loss fault (ENCUV)
57: PROFINET communication timeout
fault (E-PN)
58: CAN communication fault (SECAN)
59: Motor over-temperature fault (OT)
60: Card slot 1 card identification failure
(F1-Er)
61: Card slot 2 card identification failure