IMO HD2 IP Series, Instruction Manual

Page: 41 / 361

HD2 IP55 High-ingress Protection Series Inverters Basic Operation Instructions
-29-
5 Basic Operation Instructions
5.1 What this chapter contains
This chapter tells users how to use the inverter keypad and the commissioning procedures
for common functions of the inverter.
5.2 Keypad introduction
LCD keypad is included in the standard configuration of HD2IP series inverters. Users can
control the inverter start/stop, read state data and set parameters via keypad.
Figure 5-1 Keypad diagram
Note:
1. LCD keypad is armed with real-time clock, which can run properly after power off when
installed with batteries. The clock battery (type: CR2032) should be purchased by the user
separately.
2. LCD keypad support parameter-copy.
No. Name Instruction
Running indicator;
LED off – the inverter is stopped;
(1) RUN LED blinking – the inverter is in
parameter
autotune
LED on – the inverter is running
1 State
Indicator 2)
TRIP
Fault indicator;
LED on – in fault state
LED off – in normal state
LED blinking – in pre-alarm state
Short-cut key indicator, which displays
(3) QUICK/JOG
different state under different functions,
see definition of QUICK/JOG key for
details