IMO HD2 IP Series, Instruction Manual

Page: 165 / 361

HD2 IP55 High-ingress Protection Series
Function parameter list
-151-
Function
code
Name Description
Default
value Modify
14: Value 1 set through Modbus (0–1000)
15: Value 2 set through Modbus (0–1000)
16: Value 1 set through
PROFIBUS/CANopen/DeviceNet (0–1000)
17: Value 2 set through
PROFIBUS/CANopen/DeviceNet (0–1000)
18: Value 1 set through Ethernet 1 (0–1000)
19: Value 2 set through Ethernet 2 (0–1000)
20: HDIB input (0.00–50.00kHz)
21: Value 1 set through
EtherCAT/ Profinet/ EtherNetIP (0–1000)
22: Torque current (bipolar, 0–Triple the
motor rated current)
23: Exciting current (bipolar, 0–Triple the
motor rated current)
24: Set frequency (bipolar, 0–Max. output
frequency)
25: Ramp reference frequency (bipolar, 0–
Max. output frequency)
26: Rotational speed (bipolar, 0–Speed
corresponding to max. output frequency)
27: Value 2 set through
EtherCAT/Profinet/EtherNetIP (0–1000)
28: C_AO1 (Set P27.00 to 1. 0–1000)
29: C_AO2 (Set P27.00 to 1. 0–1000)
30: Rotational speed (0–Twice the motor rated
synchronous speed)
31: Output torque (Actual value, 0–Twice the
motor rated torque)
32–47: Reserved
P06.17 Lower limit of
AO1 output
Above function codes define the relation
between output value and analog output.
When the output value exceeds the set
max./min. output range, the upper/low limit of
output will be adopted during calculation.
When analog output is current output, 1mA
corresponds to 0.5V voltage. In different
applications, 100% of output value
corresponds to different analog outputs.
0.0%
○
P06.18
Corresponding
AO1 output of
lower limit
0.00V
○
P06.19 Upper limit of
AO1 output
100.0% ○
P06.20
Corresponding
AO1 output of
upper limit
10.00V
○
P06.21 AO1 output filter
time
0.000s
○