Calibrate Servos
Allow to calibrate the minimum, central and maximum points for each control: Channel
control, ailerons, elevator, throttle and tail. With the exception of the control channel, you don’t need to
calibrate the other values unless you intend to use the autopilot. It’s also possible to calibrate the
channels travel from the transmitter if starting “Ikarus OSD” with CTRL channel located to minimum
(<1200ms).
•
Reset: Reset the maximum and minimum values for each of the servos. Once reset you need to
move all the controls to extremes to register correctly. Note that there are not stored minimum
or maximum values for Pan and Tilt.
•
Update: Once correctly set the maximum and minimum travel values for all channels, click
Update to store those values in the OSD.
© Ikarus Team Sevilla 2010
Page. 34/60
