Flight Console
This will be the flight screen which will show the aircraft’s video. The telemetry information
encoded in the left side of the image will be decoded by the console, updating on the map the aircraft
position, as well as the different plane instruments.
The different instruments are listed from left to right: Air speed, Altitude, Compass, Artificial
Horizon and Variometer. We also have RSSI and battery level indicators. Make sure you have selected
at initial screen correct cell number for each battery.
In the map window, you can see aircraft's position and its orientation. A line always joins the
plane with stored home at the console for an easy pilot orientation. Another line (yellow) joins the
plane to the next waypoint on the route.
•
PLANE: Center the map on plane position.
•
TRACK: Indicates that the plane always remains visible on the map, moving the map when
necessary.
•
HOME: Center home position on the map.
•
Home RX: In the event that the home position is not correctly locked in the flight console
allows to receive such information from the OSD during the flight. You must change to "Return
Home" on the plane for a short period of time, so it can receive that information.
•
SATELLITE, MAP, SAT + MAP, TOPO: Select the type of map to be used.
•
FULL SCR: Maximize the flight window to fill the entire computer screen, hiding the task-bar
and maximize, minimize buttons.
•
Fix Modem: Auto-adjust the console to locate the starting telemetry line. Normally you only
need to press it once when flight starting.
© Ikarus Team Sevilla 2010
Page. 38/60
