I Sensor
This wizard help us to calibrate the current sensor. To do this it will guide us through three
steps. To move from one step to the next, you must click "OK" at the R/C transmitter.
•
With the engine off, wait until the current sensor readings are stable and press OK..
•
Set the max current that the motor will reach, or that will be used in calibration. Change it with
the "NEXT" function. Once it shown the desired value, press "OK".
•
With the throttle stick, throttle up until the measured current with an ammeter match what you
set in the previous step. Let it stabilize and press "OK."
© Ikarus Team Sevilla 2010
Page. 54/60
