IFM Ecomat 300 AC1421, Device Manual

Page: 61 / 365

61
ifm Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2 2015-11-30
Menu AS-i 1 / AS-i 2
>
5.3.3 AS-i 1 / AS-i 2: AS-i slaves
9037
The [AS-i Slaves] menu provides access to information and configuration options of the AS-i slaves.
The scope of configuration options shown ([Data] and [Setup] tab) varies according to
the status of the selected AS-i slaves.
>
Display the input/output data of the AS-i slave
10934
To display the input/output data or the parameter output of the selected AS-i slaves:
1 Select the menu page
► > or >
►
Select an AS-i slave (→ Slave selector (→ page 30 )).
► Select [Data] tab.
2 Display input/output data
> Depending on the profile of the selected AS-i slave, the page displays the following data:
>
Digital input
15972
Designation Meaning Example / Possible values
[Inputs] Current values of the digital inputs
(binary and hexadecimal
representation)
=
Data bit is switched off (0 / OFF)
=
Data bit is switched on (1 / ON)
>
Analogue input
15973
Designation Meaning Example / Possible values
[Inputs] Current values of the analogue input
channels and information about their
status

[Valid] The Valid bit indicates whether the
displayed value is valid. = Invalid value
= Valid value

[Overflow] The Overflow bit indicates whether
the displayed value is within the
value range. = Value within valid value range
= Valid value range exceeded