IFM Ecomat 300 AC1421, Device Manual

Page: 60 / 365

60
ifm Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2 2015-11-30
Menu AS-i 1 / AS-i 2
>
Display the voltage supply analysis
9088
To display the voltage supply analysis:
1 Select the menu page
► > or >
► Select [Power supply] tab.
2 Display the voltage supply analysis
> Page shows the following information:
Designation Meaning Possible values
Power supply Method of voltage supply
Aux
= Voltage is supplied separately by the
AS-i network and AUX 24 V.
AS-i
=
Voltage is only supplied by the
AS-i network.
Power24 = Voltage is supplied by data decoupling
module.
AS-i voltage AS-i voltage measured (in [V]) e.g. 30.3 V
DC earth fault Evaluation of the network symmetry
=
AS-i network is symmetrical
=
AS-i network is asymmetrical
=
AS-i network has earth fault
Graphical representation of the network symmetry:
>
Display and reset performance data
9089
To display the performance statistics of the selected AS-i master:
1 Select the menu page
► > or >
►
Select [Performance] tab.
2 Display performance data
> Page shows the following information:
Designation Meaning
Activated slaves Number of active AS-i slaves on the AS-i network
AS-i cycle time [ms] AS-i cycle time (value in [ms])

minimum shortest cycle time

maximum longest cycle time

current current cycle time
3 Optional: reset the performance data
► Press [Reset] button.
> The saved statistic data for minimum and maximum cycle times are deleted.