IFM Ecomat 300 AC1421, Device Manual

Page: 160 / 365

160
ifm Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2 2015-11-30
Appendix Fieldbus EtherNet/IP
>
Parameters: Independent mode
11058
Parameter Description Value range
Analogue channels per input slave Number of analogue channels
per input slave 4 channels* = 4 channels
(variable slave assignment)
2 channels = 2 channels
(fixed slave assignment)
1 channel = 1 channel
(fixed slave assignment)
1 channel per
A/B slave = 1 channel per A/B slave
(fixed slave assignment)
Analogue channels per output slave Number of analogue channels
per output slave 4 channels* = 4 channels
(variable slave assignment)
2 channels = 2 channels
(fixed slave assignment)
1 channel = 1 channel
(fixed slave assignment)
1 channel per
A/B slave = 1 channel per A/B slave
(fixed slave assignment)
Fail-safe state Behaviour of the slave outputs if
an interrupted fieldbus
connection is detected Reset
outputs* = All AS-i outputs are switched off in
case of an interrupted EtherNet/IP
connection (value = 0).
Hold outputs = The outputs are held in the last valid
state that existed before the
interrupted connection was
detected.
Change byte order Byte order in a word
Setting applies to all data of
object class 4, instances 100
and 150
Disabled* = Byte order in word remains
unchanged.
Enabled = Byte order in word is inverted.
* ... Default setting
In the 'Independent' configuration mode, the device-specific parameters are configured via the
GUI of the device (
→
Configuration mode: Independent
(
→ page
341 )).