IFM Ecomat 300 AC1421 Device Manual Download Page 96

Page: 96 / 365

ifm

Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2

2015-11-30

Menu

Interfaces

EtherNet/IP: Setup

16196

The [Setup] menu item provides access to the configuration options of the EtherNet/IP interface.

Notes on IP settings

12228

The device provides the following options for configuration of the EtherNet/IP interface:



Manual =

The operator sets the interface parameters (IP address, network mask,
gateway address) manually.



Automatic =

The interface parameters are automatically set through one of the
following protocols.

– Dynamic Host Configuration Protocol (DHCP)

– Bootstrap Protocol (BOOTP)

To display the current configuration method for IP parameters of the EtherNet/IP interface:

1 Select the menu page

►

Select [Fieldbus] tab.

2 Display the current configuration method for IP parameters

The [IP mode] list shows the active configuration method:

- Static

The operator sets the IP parameters manually.

- DHCP

The device receives the IP parameters from a DHCP
server.

- BOOTP

The device receives the IP parameters from a BOOTP

server.

3 Display the current IP parameters of the EtherNet/IP interface

The following parameters show the current IP settings of the EtherNet/IP interface:

Designation

Meaning

[IP address]

IP address of the configuration interface

[Subnet mask]

Subnet mask of the network segment

[Gateway address]

IP address of the EtherNet gateway

Summary of Contents for Ecomat 300 AC1421














































































































































































































































































































































































Search results

Summary of Contents for Ecomat 300 AC1421

Reviews:

Related manuals for Ecomat 300 AC1421

Brands by name

Popular brands

IFM Ecomat 300 AC1421, Device Manual

Search results

Summary of Contents for Ecomat 300 AC1421

Reviews:

Related manuals for Ecomat 300 AC1421

Brands by name

Popular brands