MSD-804FD
User’s Guide
149
The received data is displayed (Example 3) for two seconds (when the control command that is used for
displaying the received data is executed).
However, if you configure several control commands, or if you display data received from several com ports,
the display time may be shortened by one to two seconds while control commands are being successively
executed. If the received data does not fit in the full screen, the displayed data is scrolled.
Example 1: “SCREEN UP” is registered as the “MEMO”.
Example 2: “SCREEN OK” is registered as the “MEMO”.
Example 3: “PROJECTOR LAMP” is registered as the “MEMO”, and “%1LAMP=1000 1” is received.
Example 4: If the reply command to the sent command cannot be received, it causes retry over.
Number
VFD screen
Example 1
Example 2
Example 3
Example 4
