IDK MSD-804FD Series User Manual Download Page 65

Page: 65 / 233

MSD-804FD

User’s Guide

[Horizontal position]

[Vertical position]

[Fig. 7.11] Output size

The settable range depends on settings of

“

7.3.1 Output resolution [RESOLUTION]

” and “

7.3.11 Output

size [OUTPUT SIZE]

”. Values can be set unless video disappears from the top, bottom and right, left of the

screen. If the display position exceeds the settable range by changing display size, the display position will be

set to the maximum value automatically. Default is 0, and the video is displayed from the upper left of the

display device.

Summary of Contents for MSD-804FD Series










































































































































































































































Search results

Summary of Contents for MSD-804FD Series

Reviews:

Related manuals for MSD-804FD Series

Brands by name

Popular brands

IDK MSD-804FD Series, User Manual

Search results

Summary of Contents for MSD-804FD Series

Reviews:

Related manuals for MSD-804FD Series

Brands by name

Popular brands