MSD-804FD
User’s Guide
194
7.14.6
Input bitmap channel assignment [CHANNEL ASSIGN]
A bitmap can be treated as an input video source by assigning the bitmap to any input that is not currently
being used. A bitmap can be assigned to an output or input separately.
･
Not assign bitmap to input: OFF [Default]
･
Assign bitmap to input: ON
Note:
Larger resolutions require a longer writing time; it may take approximately 6 seconds at a maximum to write a
bitmap. If you switch a normal image to a bitmap image, it takes longer time to output the image, and you
cannot perform other operations while the bitmap is being written.
1. To assign bitmap channel using menu:
MSD-804FD
Top
↓
SET key
[FUNCTION SELECT]
BITMAP
▲▼
keys: Select “BITMAP”.
↓
SET key
[BITMAP]
CHANNEL ASSIGN
▲▼
keys: Select “CHANNEL ASSIGN”.
↓
SET key
[OUT1 ASSIGN]
IN
1
OFF
▲▼
keys: Select the desired input assigned for OUT1 (IN1 to IN8).
↓
◄►keys
[OUT1 ASSIGN]
IN1
O
FF
▲▼
keys: Select “OFF” or “ON”.
*
↓
SET key: Applies settings.
[CHANNEL ASSIGN]
NOW UPDATE...
Displays the message for 1 second before automatically returning to
the previous screen.
↓
[BITMAP]
CHANNEL ASSIGN
Note:
If you do not press the “SET” key, the assignment is not changed. Make sure to press the “SET” key.
* If several bitmaps are registered, select the bitmap number you want to output.
2. To assign bitmap channel using commands:
@SBA: Set bitmap input channel assignment
@GBA Get bitmap input channel assignment
