IDK MSD-804FD Series User Manual Download Page 214

Page: 214 / 233

MSD-804FD

User’s Guide

214

7.16.8

Display device status [MONITOR STATUS]

You can display the status of display device connected to video output connectors.

1. To display status of display device using menu:

MSD-804FD

Top

↓

SET key

[FUNCTION SELECT]
OTHERS

▲▼

keys:

Select “OTHERS”.

↓

SET key

[OTHERS]
MONITOR STATUS

▲▼

keys:

Select “MONITOR STATUS”.

↓

SET key

OUTA1 2 3 4B1 2 3 4
S S N S S N

Displays the status of the display device connected to output

connectors.

↓ ▲▼ keys

[OUT1A MONITOR] H30
HDCP SUPPORT

Displays the statuses of display device connected to OUT1A.

▲▼ keys

[OUT4B MONITOR]
UNCONNECTED

Displays the statuses of display device connected to OUT4B

↓ ESC key: Returns to the previous screen

OUT1B to OUT4B are available only if HDBaseT output option is mounted.

A) To output all connectors, channel number is displayed on the upper row and HDCP authentication state is

displayed on the lower row with one of the following alphabet characters.

B) To output each connector, HDCP authentication state is displayed on the lower row with one of the

following character strings.

Description

HDCP SUPPORT

HDCP-compliant display device is connected.

HDCP NOT

SUPPORT

Non-HDCP-compliant display device is connected.

HDCP ERROR

HDCP-compliant display device is connected, but the

authentication failed.

HDCP CHECK NOW

Status of display device is being checked. (such as when

connection status of monitor is changed.)

MONITOR

DISCONNECT

Monitor is disconnected (displayed only for 1 second)

Cat6 LINK

DISCONNECT

Cat5e/Cat6 cable is unplugged. (displayed only for 1 second)

Cat6 NO LINK

Cat5e/Cat6 cable is not connected.

UNCONNECTED

No display device is connected.

only for OUT1B to OUT4B.

Summary of Contents for MSD-804FD Series










































































































































































































































Search results

Summary of Contents for MSD-804FD Series

Reviews:

Related manuals for MSD-804FD Series

Brands by name

Popular brands

IDK MSD-804FD Series, User Manual

Search results

Summary of Contents for MSD-804FD Series

Reviews:

Related manuals for MSD-804FD Series

Brands by name

Popular brands