IDK MSD-804FD Series User Manual Download Page 215

Page: 215 / 233

MSD-804FD

User’s Guide

215

If it is displayed for each output connector and if a display device is connected, output signal type is displayed

on the upper right, and color depth is displayed only if HDMI is output.

H24: HDMI signals of 24-BIT COLOR are output.

H30: HDMI signals of 30-BIT COLOR are output.

D : DVI signals are output.

[Error codes]

Displaying for each output connector: the output statuses of video and audio are

displayed on the lower right. The status characters are shown from the left to the

right, the statuses of video output to HDMI or HDBaseT output connector, audio

output to HDMI or HDBaseT output connector, and audio output to the analog audio output connector are

displayed. The status of HDMI or HDBaseT output connector is displayed only if a display device is connected.

If video or audio cannot be output, an error code number or alphabet character is displayed.

[Table 7.24] Output status

Status

Video output

Audio output

If any

number or “A” is not displayed, video or audio is output correctly.

“

7.7.8 Video output connector [OUTPUT

CONNECTOR]

” is set to “OFF”.

“

7.8.2 Mute [OUTPUT MUTE]

” is set to “ON”.

DDC power supply is not input. (If no input device is connected, this status is displayed.)

No video signal is input.

No audio signal is input

Video or audio output of source device is in a Mute status.

Signals with HDCP are input, but the display device does not support HDCP. (This may

also be displayed while authenticating HDCP.)

The source device does not output required information (packets) for outputting video or

audio.

Signals that are not supported by the MSD

are input. (Sampling clock is out of the

range.)

Audio cannot be output, because
compressed audio is input. (Compressed
audio can be output only to display devices
supporting compressed audio.)

－

“

7.8.8 Audio output connector [OUTPUT

CONNECTOR]

“ is set to “OFF”.

－

“

7.7.2 Output mode [OUTPUT MODE]

” is

set to “DVI MODE” or a display device that
does not support audio is connected.

Input is set to “OFF”.

－

“

7.8.9 Digital audio output connector

[DIGITAL OUTPUT]

” is set to “OFF”.

Input status of analog audio signals cannot be detected. Even if this status is not displayed, audio may

sometimes not be output when analog input is selected.

This status is only for HDMI or HDBaseT output connectors.

2. To display status of display device using commands:

@GSS: Get I/O status

[OUT1A MONITOR] H30
HDCP SUPPORT 333

Summary of Contents for MSD-804FD Series










































































































































































































































Search results

Summary of Contents for MSD-804FD Series

Reviews:

Related manuals for MSD-804FD Series

Brands by name

Popular brands

IDK MSD-804FD Series, User Manual

Search results

Summary of Contents for MSD-804FD Series

Reviews:

Related manuals for MSD-804FD Series

Brands by name

Popular brands