MSD-804FD
User’s Guide
49
[If edges are cut off due to enlargement in the display device side]
If video is input to a wide TV or the like, the video is automatically enlarged and displayed, and sometimes
edges are cut off. In this case, change the display size (such as “Full display”, “Wide display”). If the problem
is still not resolved, set “
7.3.10 Output position [OUTPUT POSITION]
With HDBaseT output option:
If OUTA and OUTB are connected and their maximum input resolutions are not the same, apply the smaller
input resolution. By doing so, the video of the smaller resolution is not cut off, but the background color set in
“
7.3.14 Background color [BACKGROUND COLOR]
” is displayed on the edges for the video of the larger
input resolution.
To set output position and size:
■
Steps
1
Select “OUTPUT FRAME” in “
2
Set the
display position by following “
Output position [OUTPUT POSITION]
” to match the
upper left of the display device and test pattern.
3
Reduce the test pattern by following “
” to match the lower right of
the display device and the test pattern.
4
Set the test pattern to
“OFF”.
Edges of the top, bottom,
right, and left are cut off
due to enlarged display in
the display device side.
Test pattern
Match the upper left of the
test pattern with the upper
left of the display device.
Match the upper right of the
test pattern with the upper
right of the display device.
[Fig. 7.11] Setting position, size, and masking of output side
