MSD-804FD
User’s Guide
129
7.9.5
Audio format [AUDIO FORMAT]
You can set the audio format and maximum sampling frequency to be output from a source device. This menu
is valid only all conditions below are met: if you select
“INTERNAL EDID” for “
“, you select a resolution other than “UNUSED” for ”
7.9.3 Input resolution for AV devices [AV
”, and you connect an HDMI device such as a Blu-ray recorder.
[Table 7.6] Audio formats
Audio format
ON/OFF
Sampling frequency (kHz)
Linear PCM
Not settable
32/44.1/48/88.2/96/176.4/192 (48)
AC-3/Dolby Digital
Settable (OFF)
32/44.1/48 (48)
AAC
Settable (OFF)
32/44.1/48/88.2/96 (48)
Dolby
Settable (OFF)
32/44.1/48(48)
DTS
Settable (OFF)
32/44.1/48/96 (48)
DTS-HD
Settable (OFF)
44.1/48/88.2/96/176.4/192 (192)
Dolby TrueHD
Settable (OFF)
44.1/48/88.2/96/176.4/192 (96)
Default values are enclosed in parentheses.
1. To set the audio format using menu:
MSD-804FD
Top
↓
SET key
[FUNCTION SELECT]
EDID
▲▼
keys: Select “EDID”.
↓
SET key
[EDID]
AUDIO FORMAT
▲▼
keys: Select “AUDIO FORMAT”.
↓
SET key
[IN1 PCM]
MAX FREQ:
4
8kHz
▲▼
keys: Set the maximum sampling frequency of IN1
(32 kHz, 44.1k Hz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz).
↓
◄► keys
[IN1 Dolby Digital]
O
N
▲▼
keys: Set “OFF” or “ON” for AC-3/Dolby Digital output of IN1.
↓
◄► keys
[IN1 Dolby Digital]
MAX FREQ:
4
8kHz
▲▼
keys: Set the maximum sampling frequency of AC-3/Dolby Digital
of IN1 (32 kHz, 44.1 kHz, 48 kHz).
This is displayed only if output (set in the previous screen) is set to
“ON”
Repeat the same procedure to set the audio formats of AAC, Dolby , DTS, DTS-HD, and
Dolby TrueHD.
↓
SET key: Applies settings.
[AUDIO FORMAT]
NOW UPDATE...
The message is displayed for one second and then previous screen is
displayed automatically.
↓
[EDID]
AUDIO FORMAT
Note:
If you do not press the “SET” key, the audio format is not changed. Make sure to press the “SET” key.
For each input
