IDEC WindO/I-NV4, User Manual

Page: 590 / 1738

9 Potentiometer
8-170
WindO/I-NV4 User’s Manual
Trigger Type: Selects the condition to display the Potentiometer from the following.
Always visible: The Potentiometer is always displayed.
While ON: Displays the Potentiometer when the value of device address is 1.
While OFF: Displays the Potentiometer when the value of device address is 0.
While satisfying the condition: Displays the Potentiometer when the condition is satisfied.
Data Type: Selects the type of data handled by the conditional expression for the visible condition.
This option can only be configured if
While satisfying the condition
is selected for
Trigger Type
.
For details, refer to Chapter 2 “1.1 Available Data” on page 2-1.
Device Address: Specifies the bit device or the bit number of the word device to serve as the visible condition.
This option can only be configured when While ON or While OFF is selected for Trigger Type .
Click to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2
“5.1 Device Address Settings” on page 2-70.
Condition: Specifies the conditional expression for the visible condition.
This option can only be configured when
While satisfying the condition
is selected for
Trigger
Type
.
Click to display the
Trigger Condition Settings
dialog box. For the conditional expression
configuration procedure, refer to Chapter 2 “5.2 Setting Conditional Expressions” on page 2-73.
Comment: Used for entering a comment for the visible condition. The maximum number is 80 characters.
Always show
Potentiometer
state
1
0
Hide Show Hide Hide Show Show
Value of
device address
Potentiometer
state
Value of
device address
Potentiometer
state
1
0
Show Show Show Hide Hide Hide
Hide Hide Hide Show Show Show
Potentiometer
state
Satisfied
Not satisfied
Condition