IDEC WindO/I-NV4, User Manual

Page: 410 / 1738

1 Shapes
7-20
WindO/I-NV4 User’s Manual
●
Properties of Equilateral Polygon Dialog Box
This section describes items and buttons in the Properties dialog box.
■ Line Width
Selects the line width for the equilateral polygon from the following.
1 dot , 2 dots , 3 dots , 5 dots
3 dots and 5 dots can only be configured when Solid is selected for Line Type .
■ Line Type
Selects the line type for the equilateral polygon from the following.
Solid , Dot , Dash , Long Dash , Long Dash Dot , Long Dash Dot Dot
Dot , Dash , Long Dash , Long Dash Dot , and Long Dash Dot Dot can only be configured when 1 dot or 2 dots
is selected for Line Width .
■ Foreground Color, Background Color
Selects the foreground color and the background color to use for the equilateral polygon (color: 256 colors,
monochrome: 16 shades).
Click either button to display the Color Palette. Select a color from the Color Palette.
■ Pattern
Selects the pattern or tonal gradation for the equilateral polygon.
Click this button to display the Pattern Palette. Select a pattern or tonal gradation from the Pattern Palette.
■ Flash
Select this check box to make the equilateral polygon flash.
The flash interval is specified with
Flashing Cycle on the System tab in the Project Settings dialog box.
■ Coordinates
X, Y: Specifies the display position of the equilateral polygon in coordinates.
With the upper-left corner of the screen as the origin, the upper-left corner of the square that
circumscribes the equilateral polygon is the X and Y coordinates.
X:
0 to (base screen horizontal size - 1)
Y: 0 to (base screen vertical size - 1)
(0, 0)
X
Y
Screen
Equilateral polygon