IDEC WindO/I-NV4, User Manual

Page: 1116 / 1738

4 Using the Data
17-14
WindO/I-NV4 User’s Manual
4.2 Notifying with a Beep when the Counted Operation Time Reaches the Threshold
1
On the Configuration tab, in the System Setup group, click Preventive Maintenance .
The Preventive Maintenance Settings dialog box is displayed.
2
Specify the number of device addresses to monitor in
Number of Items
.
3
Select the number to register the Preventive Maintenance settings to in Settings , then click Edit .
The Individual Settings dialog box is displayed.
4
Specify the bit device or the bit number of the word device to monitor with Monitor Device Address .
5
Select the
Measure Operation Time
check box on the
Operation Time
tab and specify the destination device
address for the counted operation time.
6
Select the data type for the value of
Measure Operation Time
device address with
Data Type
.