IDEC WindO/I-NV4, User Manual

Page: 393 / 1738

WindO/I-NV4 User’s Manual
7-3
1 Shapes
7
Dra
w
in
gs
1.2 Polyline
●
Polyline Drawing Procedure
This section describes the procedure for drawing polylines.
1
On the Home tab, in the Drawings group, click Shapes , and then click (Polyline) under Basic Shapes .
The mouse cursor changes to (pencil).
2 Click at the location (start point) to start drawing the polyline on the edit screen.
3 Click the end point locations in order.
A line is drawn that connects the start point and the various end point locations in the order that they were created.
4 Double click at the stop point location.
A line is drawn that connects the last end point and the stop point.
HG3G HG2G-5F HG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T HG4G HG1G HG1P HG2J-7U
Stop
point
Start
point
End
point
End
point
The maximum number of end points in a polyline, including the start point and the stop point, is 300
points.
• To change the style of the drawn polyline, perform one of the following operations.
- Double click the polyline to open the Properties dialog box
- Select the polyline and select the style with
Shape Style on the Format tab
- Select the polyline and open the right click menu
• To change the start point, end points, or the stop point of the drawn polyline, select the polyline and right
click on it, then click Reshape . is displayed on the polyline. Drag to the desired location. Double
click the edit screen or press the key to finish changing the shape.