IDEC WindO/I-NV4, User Manual

Page: 1357 / 1738

WindO/I-NV4 User’s Manual
25-15
1 Monitoring with WindO/I-NV4
25
M
on
ito
r F
un
ctio
n
●
Batch Monitor
Displays sequential addresses as a batch.
■ Target
Select the device that includes the device address that will be set from MICRO/I or External Device (External
Device ID): (External Device Name) .
You can configure the External Device ID and the external device name in the Communications Driver Network
tab on the Project Settings dialog box. For details, refer to Chapter 4 “3.4 Communication Driver Network Tab” on
page 4-52.
■ Device Type
Selects the device type.
The list only shows device types that can be used.
■ Address Number
Specify the address. The range that can be set varies based on the device type selected.
■ Bit Number
Specify the bit (0 to 15) of the word device when a word device is selected in Device .
■ Length
Specifies the number of device addresses displayed in the list (Bit number of the word device: 1 to 16, Bit Device or
Word Device: 1 to 1000).
■ Data Type
Selects the data format of the displayed value. For details, refer to Chapter 2 “1.1 Available Data” on page 2-1.
(Monitor)