IDEC WindO/I-NV4, User Manual

Page: 559 / 1738

WindO/I-NV4 User’s Manual
8-139
6 Multi-Button
8
Bu
tto
ns
●
Security
Tab
This tab is used to restrict displaying and using the part by security groups.
This option can only be set when Use Security functions is selected. The Use Security functions check box is set
on General tab in the Security dialog box.
■ (Settings)
Displays the list of security groups used on the MICRO/I.
■ Security Settings
The Security Settings dialog box is displayed. If you create a security group in the Security Settings dialog box, you
can select that created group. For details, refer to Chapter 23 “2.2 Adding and Editing Security Groups” on page 23-
19.
(Settings)
No.: Displays the security group numbers (1 to 15).
Group Name: Displays the name of the security group.
Display: Displays whether or not there is permission to display the part. Only Permitted security groups
can display this part. If all security groups are set to Permitted , this part will be displayed even
if no user account has been selected. Double clicking the cell switches between Permitted and
Prohibited .
Input: Displays whether or not there is permission to use the part. Only Permitted security groups
can use this part. If all security groups are set to Permitted , this part can be used even if no
user account has been selected. Double clicking the cell switches between Permitted and
Prohibited .
• You can also switch between
Permitted
and
Prohibited
by right-clicking on a
Display
or
Input
cell.
• Restricting the display and use of the part by switching between Permitted and Prohibited in Display
and
Input
cells is similar to using the
Trigger Condition
tab.
For details about security functions, refer to Chapter 23 “User Accounts and the Security Function” on page
23-1.