IDEC microsmart pentra, Programming Manual

Page: 203 / 344

FT1A S
MART
A
XIS
U
SER
’
S
M
ANUAL
FT9Y-B1382 17-1
17: C
OORDINATE
C
ONVERSION
I
NSTRUCTIONS
Introduction
XYFS (XY Format Set)
Applicable CPU Modules
Valid Devices
For the valid device address range, see pages 6-1 and 6-2 (Basic Vol.).
When T (timer) or C (counter) is used as X0 through Xn or Y0 through Yn, the timer/counter current value (TC or CC) is read out.
S1 (Format number)
Select a format number 0 through 7. A maximum of 8 formats for XY conversion can be set.
Xn (X value), Yn (Y value)
Enter values for the X and Y coordinates. Two different data ranges are available depending on the data type.
The coordinate conversion instructions convert one
data point to another value, using a linear
relationship between values of X and Y.
(X0, Y0)
(X1, Y1)
(X2, Y2)
X
Y
When input is on, the format for XY conversion is set. The XY
coordinates define the linear relationship between X and Y.
No. of XY Coordinates n
2 to 32 0  n  31
XYFS(*) S1
*
Y0
*****
Xn
*****
.....
X0
*****
Yn
*****
FT1A-12 FT1A-24 FT1A-40 FT1A-48 FT1A-Touch
X X X X X
Device Function I Q M R T C D Constant Repeat
S1 (Source 1) Format number — — — — — — — 0 to 7 —
X0 through Xn X value X X X X X X X 0 to 65535 —
Y0 through Yn Y value X X X X X X X
0 to 65535
–32768 to 32767
—
Data Type Word Integer
Xn (X value) 0 to 65535 0 to 65535
Yn (Y value) 0 to 65535 –32768 to 32767