IDEC MicroSmart pentra FC5A-C10R2, User Manual

Page: 149 / 473

3: I
NSTALLATION AND
W
IRING
FC5A M
ICRO
S
MART
U
SER
’
S
M
ANUAL
FC9Y-B1268 3-23
Terminal Connection
Caution

Make sure that the operating conditions and environments are within the specification values.

Be sure to connect the grounding wire to a proper ground, otherwise electrical shocks may be
caused.

Do not touch live terminals, otherwise electrical shocks may be caused.

Do not touch terminals immediately after power is turned off, otherwise electrical shocks may be
caused.

When using ferrules, insert a wire to the bottom of the ferrule and crimp the ferrule.

When connecting a stranded wire or multiple solid wires to a screw terminal block, use a ferrule.
Otherwise the wire may slip off the screw terminal block.
Ferrules, Crimping Tool, and Screwdriver for Phoenix Terminal Blocks
The screw terminal block can be wired with or without using ferrules on the end of cable. Applicable ferrules for the
Phoenix terminal blocks and crimping tool for the ferrules are listed below. The screwdriver is used for tightening the
screw terminals on the MicroSmart modules. These ferrules, crimping tool, and screwdriver are made by Phoenix Contact
and are available from Phoenix Contact.
Type numbers of the ferrules, crimping tool, and screwdriver listed below are the type numbers of Phoenix Contact.
When ordering these products from Phoenix Contact, specify the Order No. and quantity listed below.
Ferrule Order No.
Quantity of Cables Cable Size Phoenix Type Order No. Pcs./Pkt.
For 1-wire connection
UL1007 AWG16 AI 1,5-8 BK 32 00 04 3 100
UL1007 AWG18 AI 1-8 RD 32 00 03 0 100
UL1015 AWG22 AI 0,5-8 WH 32 00 01 4 100
UL2464 AWG24 AI 0,25-8 YE 32 03 03 7 100
For 2-wire connection
UL1007 AWG18 AI-TWIN 2 x 0,75-8 GY 32 00 80 7 100
UL1015 AWG22 AI-TWIN 2 x 0,5-8 WH 32 00 93 3 100
Crimping Tool and Screwdriver Order No.
Tool Name Phoenix Type Order No. Pcs./Pkt.
Crimping Tool CRIMPFOX ZA 3 12 01 88 2 1
Screwdriver
For power supply terminals SZS 0,6 x 3,5 12 05 05 3 10
For I/O modules,

communication adapter,

communication module,

expansion RS232C/RS485
communication modules
SZS 0,4 x 2,5 12 05 03 7 10
Screw Terminal Tightening Torque
CPU modules 0.5 N·m
I/O modules

Communication adapter

Communication module

Expansion RS232C/RS485
communication modules
0.22 to 0.25 N·m
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com