2-10
2
Figure 2-3 Configuration Program shown prior to saving
the new settings
7.
Saving the New Settings
After the last parameter has been accepted, the program will give
you several configuration choices.
The program may give you the opportunity to set the SRE and ESE
enable bit registers and to save the values so the unit can generate
a SRQ at power turn-on. Enter
y
to set PSC 0;
N
to set PSC 1 or
click the appropriate boxes.
The program may ask if you want to lock the parameters so that
they cannot be changed by the end user. The configuration program
automatically unlocks the parameters whenever it is run. Enter
y
to lock;
N
to continue or click the appropriate box.
The program will ask if you want to save the current configuration.
Enter
y
to save;
N
to continue or click the appropriate box
8.
Configuring other units
The program will ask if you want to configure another unit. Enter
y
to configure another unit;
N
to exit.
Summary of Contents for 4809A
