CS-F620TR Programming Software Manual
(rev 1.0) -
Common Programming Screen
59
COMMON PROGRAMMING SCREEN
C
OMMON
P
ROGRAMMING
S
CREEN
I
CON
:
Located in Common folder. This
programming screen allows the programmer to edit miscellaneous parameters.
The preceding screen shot shows the defaults for this programming screen. Double click
on the field you wish to edit. The next table is a description for each row in each group:
C
OMMON
P
ROGRAMMING
S
CREEN
F
IELD
D
ESCRIPTION
T
ABLE
Group
Row
Description
Default
Clone
Comment
(1) & (2)
These rows allow you to insert custom comments
concerning the radio. You can enter up to 16 characters in
each row. Note: You can read these comments quickly
without reading the entire contents of the radio by
hooking up the target radio to the programming computer
and selecting Clone -> Information from the main menu.
Blank
Operational
Setting
Revert on
Power UP
Select “Enable” or “Disable”. Selecting “Enable” sets the
radio to always power up to the first system in the
channel list (see
Operation
programming screen).
Selecting “Disable” sets the radio to always power up to
the last system selected when the radio was powered
down.
Disable
Operational
Setting
Invert TX
Data
Select “On” or “Off”. Selecting “On” inverts the polarity
of TX Data for PassPort and LTR systems. The Invert TX
Data field in the
Repeater Setting
programming sub-
screen will over-ride this setting.
OFF
Operational
Setting
Invert RX
Data
Selecting “On” inverts the polarity of RX Data for
PassPort and LTR systems. The Invert RX Data field in
the
Repeater Setting
programming sub-screen will over-
ride this setting.
OFF