CS-F620TR Programming Software Manual
(rev 1.0) -
LTR Programming Screen
33
Group
Field
Description
Default
Suggested
Settings
Scan
Auto Group
Select
Select “Enable” or “Disable”. Selecting
“Enable” here puts the radio automatically into
group scan as this system is selected. The
groups scanned will be the groups set to “Yes”
in the Scan Member field of the LTR
Talk
Group Setting
programming sub-screen (see
page 36). Even if this field is enabled, Scan can
be toggled between “Disable” and “Enable” if
the
Scan
key is pressed (assuming the Edit TG
List field is set to “Enabled”). Note: if Block
Mode is “Enabled” then the type of scan used
(if this field is enabled) will be “Block”.
Otherwise, it will be “Individual”.
Disable
(Blank)
Set as
needed.
Scan
User Edit
Select “Enable” or “Disable”. Allows user to
manually add or delete this system from the list
of systems to be scanned. These edits are
normally lost if the user changes groups or
cycles power to the radio (though not when
changing groups) unless the Save User Settings
field is enabled.
Disable
(Blank)
Set as
needed.
Scan
Save User
Settings
Select “Enable” or “Disable”. Allows user’s
changes to the systems being scanned to be
saved when the radio’s power is cycled or the
system is changed.
Disable
(Blank)
Set as
needed.
Scan
Edit TG
List
Select “Enable” or “Disable”. Allows user to
manually edit the groups being scanned. These
edits are normally lost if the user changes
groups or cycles power to the radio (though not
when changing groups) unless the Save TG
Scan field is enabled.
Disable
(Blank)
Set as
needed.
Scan
Save TG
Scan
Select “Enable” or “Disable”. Allows user’s
changes to the groups being scanned to be
saved when the radio’s power is cycled or the
system is changed.
Disable
(Blank)
Set as
needed.
DTMF
Decode ch
Select “None” or any of the “DTMF Decode
Pri-Codes” listed. If a “DTMF Decode Pri-
Code” has been selected, the radio will emit a
ring tone and flash a “bell” icon if the proper
DTMF sequence of digits is received. You
must set up a DTMF decode entry to use this
function (see the
DTMF Decode
programming
screen - page 48). If the
Select Call
key is
pressed, the radio will also mute to dispatch
traffic until DTMF digits matching the Primary
Code or Secondary Code digit string for the
selected DTMF entry has been received.
None
(Blank)
Set as
needed.
