Icom IC-F620, Programming Software Manual

Page: 79 / 82

CS-F620TR Programming Software Manual
(rev 1.0) -
LTR Trunking 76
LTR TRUNKING
This is the recommended setup and function description for a radio that will be primarily
used on a LTR system.
Refer to the next table for a description of what these keys do.
K
EY
A
SSIGNMENTS AND
F
UNCTIONS
Keys Key
Assignment Function
Group
Up/Down N/A Use this to scroll through the group list. A double beep will sound as
you reach the “limit” and cycle to the “top” or “bottom” of the list.
P
0
Scan Use this to key to enable scan mode and also to edit systems or groups
to be scanned (if allowed for the system in use – see the User Edit or
Edit TG List fields in the
LTR programming screen).
To enable group scan, press either of the Group Up/Down keys and
then enable scan with this key. To enable system scan, press either of
the
System Up/Down keys and then enable scan with this key.
The Scan key is also used to toggle whether a group or system is
scanned. If User Edit and/or Edit TG List has been enabled for a
system and the system is not in scan mode, you can select which
groups or systems to scan or not scan. Select the targeted group or
system, press and hold the
Scan key down until you see “SCAN ADD”
or “SCAN DEL”. This adds or deletes the system or group from being
scanned. A steady “S” icon indicates that the system or group is in the
scan list. No “S” icon indicates that it has been removed. A blinking
“S” indicates scan mode is active.
P
1
Nuisance
Delete This is useful to temporarily remove non-essential systems from being
scanned. This will not work for groups. Cycling radio power or
changing systems will clear this setting.
P
2
Talk Around If the radio has a Conventional or another LTR system programmed
into it, this key would be used to quickly switch to that system for
localized or other use.
P
3
Mode Display
Type This mode provides useful information concerning the system the radio
is currently using. Particularly useful when attempting to troubleshoot
problems a user may be experiencing in the field with an LTR system.
P
4
Custom Set aside for custom use such as for a Phone or Priority key.
System
Up/Down N/A Use this to scroll through the system list. A double beep will sound as
you reach the “limit” and cycle to the “top” or “bottom” of the list.
P0: Scan
P4: Custom
P1: Nuisance Delete
P3: Mode Display Type
P2: Talk Around
Group Up/Down System Up/Down