![background image](http://html.mh-extra.com/html/icom/ic-f620/ic-f620_programming-software-manual_612653042.webp)
CS-F620TR Programming Software Manual
(rev 1.0) -
Conv. Programming Screen
39
Group
Field
Description
Default
Suggested
Settings
Atr
Select “Priority,” “Phone” or “Phone Off” (or
“Return” to exit without selecting a new
setting). Selecting “Priority” sets this system as
the one to be used if the
Priority
key is
pressed. Note: changing this field to “Priority”
will deselect any other system from being the
priority system. Selecting “Phone” sets this
system as the one to be used if the
Phone
Request
key is pressed. Note: changing this to
“Phone” will deselect any other system from
being the phone request system. Select “Phone
Off” to clear this setting.
If no
system has
been set as
a priority
system.
Otherwise:
Phone OFF
(Blank)
Mandatory
field.
Amongst the
programming
screens for
PassPort
,
LTR
and
Conventional
at least one
system needs
to be set as a
priority
system even
if no
Priority
key is
programmed.
Set as
needed.
Frequency
RX
Enter from 1.000000 to 520.000000 (though, of
course, the radio will only function for
frequencies it is designed for). This is the radio
receive frequency for this channel.
Mandatory
field - set as
needed.
Frequency
TX
Enter from 1.000000 to 520.000000 (though, of
course, the radio will only function for
frequencies it is designed for). This is the radio
transmit frequency for this repeater channel.
Blank
Set as
needed.
W/N
Select “Wide” or “Narrow”. Specify if you
wish to use wide or narrow channel width for
this system.
Wide
(Blank)
Set as
needed.
When
working with
conventional
repeaters,
consult the
system
operator.