![background image](http://html.mh-extra.com/html/icom/ic-f620/ic-f620_programming-software-manual_612653056.webp)
CS-F620TR Programming Software Manual
(rev 1.0) -
Key & Display Assign Programming Screen
53
When done editing in this programming screen you can proceed to other programming
screens, save your programming parameters to a file or proceed to writing the
information to the radio (assuming that editing has been finished for all other required
programming screens also).
P
ROGRAMMABLE
K
EY
F
UNCTIONS
P
ROGRAMMABLE
K
EY
F
UNCTIONS
D
ESCRIPTION
T
ABLE
Key Function
Description
Fields and/or
Programming
Screens Related to
Null
Key assigned with this has no function.
NA
Send DTMF
Key assigned to this function will bring up a list of DTMF
entries to select and send when activated. These entries are
listed numerically by their order of entry in the
DTMF
Encode
programming screen.
DTMF Encode
programming screen
Select Call
This is a DTMF function only. Key assigned to this
function will toggle Select Call “On” or “Off”. When
select call is “On” the radio is muted to dispatch traffic
until a DTMF digit sequence that matches either the
primary or secondary digit sequence of the DTMF entry
selected in the “DTMF Decode ch” field for that system is
received. You must create an entry in the
DTMF Decode
programming screen and select that entry in the “DTMF
Decode ch” for the desired system for this to function
properly. Note, once a DTMF selective call has been “de-
coded” the key needs to be toggled back “On” to return to
selective call mode.
See the
DTMF
Decode
programming screen
and the “Decode ch”
field in the
PassPort
,
LTR
and
Conv.
programming
screens.