![background image](http://html.mh-extra.com/html/icom/ic-f620/ic-f620_programming-software-manual_612653053.webp)
CS-F620TR Programming Software Manual
(rev 1.0) -
DTMF Decode Programming Screen
50
Group
Field
Description
Default
Suggested
Settings
Dead Beat
Disable
Code
Enter up to 10 numbers here. This is the
sequence of DTMF digitals that will “stun” the
radio, causing it to become mute and unable to
transmit. Use the value in the Dead Beat Enable
Code field to reactivate the radio to normal.
Cycling the power or changing systems will not
clear the radio from “stun” mode. The radio
will display the text in the Stun Text field of
the
Field Data
programming screen on power
up if it is in “stun” mode.
Blank
Set as
needed.
Dead Beat
Response
Select “None” or any listed entry (you must
have entries in the
DTMF Encode
programming screen to see a list of selections
here). This is the DTMF response given upon
the proper decode of the digits in the Dead Beat
Disable Code field.
None
Set as
needed.
Idle Reset
Enter from .1 to 32.767 (in seconds). Time
receiver is un-muted after decode.
5.000
Set as
needed.
When done editing in this programming screen you can proceed to other programming
screens, save your programming parameters to a file or proceed to writing the
information to the radio (assuming that editing has been finished for all other required
programming screens also).