![background image](http://html.mh-extra.com/html/icom/ic-f620/ic-f620_programming-software-manual_612653064.webp)
CS-F620TR Programming Software Manual
(rev 1.0) -
Common Programming Screen
61
Group
Row
Description
Default
Scrambler
Synchronous
Capture
Select Standard or Continuous. This setting is for the UT-
110 only. If this is set to “Standard”, sync starts when
incoming signals are received (when squelch opens). If
this is set to “Continuous” sync is continuous. For
Conventional mode, “Standard” is recommended (though
in “Standard” the scrambler may not sync up for as long
as 4.4 seconds). For LTR or Passport, “Continuous” must
be selected here (though with Continuous mode, the radio
may experience occasional garble during voice
transmissions).
Standard
Scrambler
Tone Start
Timing
Select Off, 300ms, 600ms, 1100ms. This setting is for the
UT-110 only and only if the Synchronous Capture field is
set to “Standard”. Sets the sync tone delay.
OFF
When done editing in this programming screen you can proceed to other programming
screens, save your programming parameters to a file or proceed to writing the
information to the radio (assuming that editing has been finished for all other required
programming screens also).