manualshive.com logo in svg

Icom IC-F620, Programming Software Manual

Share
Download
Icom IC-F620 Programming Software Manual Download Page 35

CS-F620TR Programming Software Manual 

(rev 1.0) - 

LTR Programming Screen

32

Group

Field

Description

Default

Suggested
Settings

TG

Dec. Pri.
TG

Select “Enable” or “Disable”. Select “Enable”
if you wish to force monitor the Primary Group
(the first group listed in the LTR

 Talk Group

Setting

 programming sub-screen). Note,

selecting “Enable” here will also turn the “CH”
field of the first row of the LTR 

Talk Group

Setting

 programming sub-screen red, indicating

forced monitor. If set to “Enable,” it does not
matter if the radio is in scan mode or not, or
whether CH 1 (primary group) is a scan
member or not, the Primary Group will still be
monitored.

TOT

Set to “OFF” (manually type the word in) or
enter from 0 to 255 seconds. Setting this
prevents the radio from transmitting for a
period longer than this timer.

OFF

Set as
needed.

Talk
Around

Select “None” or any of the Conventional or
LTR systems that appear in this list. This is the
system reverted to if the 

Talk Around

 key is

pressed. When “None” is selected here and the

Talk Around

 key is pressed, LTR simplex

operation on the home channel is allowed.

None
(Blank)

Consult your
system
operator.

ATB Ring
Back

Select “Enable” or “Disable”. If a user attempts
to transmit and the system is busy, enabling
this will sound a ringing tone when the system
is ready to accept traffic again.

Enable
(Blank)

Set as
needed.

Scan

Scan
Enable

Select “Enable” or “Disable”. Selecting
“Enable” will allow this system to be scanned
when performing system scan. Selecting
“Disable” will prevent this system from being
scanned. Even if the User Edit field is set to
“Enable” the user will not be able to add this
system to the list of systems scanned (if
“Disable” is selected in this field).

Enable
(Blank)

Set as
needed.

Scan

Block
Mode

Select “Enable” or “Disable”. When enabled,
this will cause the radio to receive all groups in
a range between the talk groups listed in the
LTR 

Talk Group Setting

 programming sub-

screen (see page 36) under CH 2 and CH 3.
Note: Ensure that the group listed under CH 2
is numerically lower than the group in CH 3 or
this field will be marked with a 

 and will not

work. These groups will be scanned no matter
the setting of the Scan Member field in the
LTR 

Talk Group Setting

 programming sub-

screen. If you do not intend to use Block Mode
do not assign a 

Scan Type

 key.

Disable
(Blank)

Set as
needed.

Summary of Contents for IC-F620



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands