background image

- 1 -

RS-407B

Bistable receiver

Electronic relays are used for radio remote control of gates, 

shutters, lighting, arming alarm systems, etc. The remote control 

system consis-ting of a transmitter (remote) and receiver (relay). 

There is a possibility of cooperation between many transmitters 

to one receiver and one transmitter to multiple receivers.

The RS-407B receiver works with dedicated devices 

(transmitters) by F&F: RS-P (remote control) and RS-N 

(flush-mounted transmitter).

The impulse caused by pressing a button on the remote control 

sends a coded signal to the receiver. Remote control is protected 

against break transmission after releasing the button. Thanks 

to this, even the shortest activation function is the full frame of 

data transmissions. Data transmission from the remote control is 

indicated by flashing of red LED on the remote. When the signal 

Purpose

Functioning

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste!  

According to the Law on Waste, electro coming from households free of charge and can 

give any amount to up to that end point of collec� on, as well as to store the occasion of 

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

Summary of Contents for RS-407B









Reviews: